Titanium Alloy Products

Titanium & Titanium Alloys Grade 1 is the softest titanium with the highest ductility, good cold form-ability which gives Titanium & Titanium Alloys Grade 1 an excellent resistance from mild to high oxidization.Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specifications

Sheet/Plate : ASME SB-265
Round Bar/Wire : ASME SB-348, ASTM F-67
Pipe : ASME SB-337, ASME SB-338
Tube : ASME SB-337, ASME SB-338
Fittings : ASME SB-363
Forgings : ASME SB-381

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

SIZE 0.5MM TO 6MM DIA WIRE.

          .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kg

Features

• Forgings : AMS 4981, MIL-T-9047

• Round Bar : AMS 4981

Titanium mixed with other chemical elements such as aluminum, molybdenum and zirconium produces a wide range of titanium alloys.

Grade 6Al 2Sn 4Zr 6Mo titanium alloy possesses high strength at elevated temperatures, good hardenability and good weldability. It is heat-treatable alpha-beta alloy.

The following sections will discuss grade 6Al 2Sn 4Zr 6Mo titanium alloy in detail.

Chemical Composition

The chemical composition of grade 6Al 2Sn 4Zr 6Mo titanium alloy is outlined in the following table.

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.

       .AVAILABLE IN STOCK.              

Additional Information:

• Minimum Order Quantity: 10 kgs

Features

• Forgings : MIL-T-9046, MIL-T-9047

• Round : ASME SB-348, AMS 4957, AMS 4958

• Sheet/Plate : ASME SB-265

Ti3Al8V6Cr4Mo4Zr Grade 19 (Beta C)

This metastable beta alloy is strip producible and cold formable. The alloy has been used for springs, fasteners, torsion bars and as extruded tubulars for deep sour well applications and is listed with the MR0175 approved alloys. The alloy is heat treatable to a wide range of strengths.

Beta C Grade 20

Grade 20 has identical mechanical and physical properties to Grade 19 but has the addition of palladium (0.04-0.08%) to increase its corrosion resistance in extreme sour environments at elevated temperature. 

Composition

Table 1. The composition of Ti3Al8V6Cr4Mo4Zr.

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.

       .AVAILABLE IN STOCK.              

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Features

• Forgings : MIL-T-9046, MIL-T-9047

• Round : ASME SB-348, AMS 4930, AMS 4931, AMS 4956

• Sheet/Plate : ASME SB-265, ASTM F136, AMS 4907

Titanium alloys are divided into three main groups: alpha-phase, beta-phase, and alpha-beta-phase. Grade 23 Ti 6Al 4V ELI alloy is an alpha-beta wrought alloy. The ELI stands for extra low interstitial. For an alloy to be branded as an ELI product, it should be produced as such at the mill.

The following sections will discuss in detail about grade 23 Ti 6Al 4V ELI alloy.

Chemical Composition

The chemical composition of grade 23 Ti 6Al 4V ELI alloy is outlined in the following table.

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.

.AVAILABLE IN STOCK.

Additional Information:

• Minimum Order Quantity: 10 KGS

Forgings: AMS 4983, AMS 4984, AMS 4986, AMS 4987

 Ti10V2Fe3Al  offers high strength/toughness combinations and is deep hardenable.Composition

Table 1. The composition of Ti10V2Fe3Al.

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.

       .AVAILABLE IN STOCK.              

Additional Information:

• Minimum Order Quantity: 10 KGS

Features

• Fittings : ASME SB-363

• Forgings : ASME SB-381

• Pipe : ASME SB-337

• Round Bar/Wire : ASME SB-348, ASTM F-67, AMS 4921

• Sheet/Plate : ASME SB-265, AMS 4901

• Tube : ASME SB-338

CP titanium Grade 4 provides corrosion resistance, strength and fatigue characteristics that compare favorably to those of nickel and steel alloys. The strongest grade of unalloyed grades 1, 2, 3 and 4, this is a commercially pure, moderately formable alloy with good ductility.

CHEMICAL COMPOSITION OF CP TITANIUM GRADE 4

• Carbon 0.080 max
• Nitrogen 0.050 max
• Oxygen 0.40 max
• Iron 0.50 max
• Hydrogen 0.015 max
• Other, 0.3 max per AMS 4921 G or 0.40 max per ASTM B 348-99
• Titanium balance

HEAT TREATMENT OF CP TITANIUM GRADE 4

• Anneal
  • Holding at 1103° to 1301F (595° to 705°C) for two hours
  • Air cool
  • Stress relive by holding at 1004° to 1103°F (540° to 595°C)for 15 to 30 minutes
  • Air cool
• Intermediate and final annealing in inert gas or vacuum
• Perform final heat treatments in vacuum

APPLICATIONS OF CP TITANIUM GRADE 4

• Marine and saltwater applications
• Chemical industry

MACHINABILITY OF CP TITANIUM GRADE 4

• Comparable to austenitic stainless steel
• Low speed, heavy feed rate and abundant cutting fluid
• Rigid setups
• Sharp tools
• Employ safety measures because titanium chips are extremely combustible

WORKABILITY OF CP TITANIUM GRADE 4

• Hot roll, forge, spin form, hot press and hydroform
• Initial roughing at 86° to 122°F (30° to 50°C) higher than beta transus
• Typically finish from 1499° to 1652°F (815° to 900°C)
• Bend, stretch, head, stamp and draw at room temperature
• Fix springback variance by hot sizing

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.

       .AVAILABLE IN STOCK.              

Additional Information:

• Minimum Order Quantity: 10 KGS

Features

• Fittings : ASME SB-363

• Forgings : ASME SB-381

• Pipe : ASME SB-337, ASME SB-338

• Round Bar/Wire : ASME SB-348,ASTM F-67, AMS 4921

• Sheet/Plate : ASME SB-265, AMS 4902

• Tube : ASME SB-337, ASME SB-338b, AMS 4942

GENERAL CHARACTERISTICS OF CP TITANIUM GRADE 2

CP titanium Grade 2 offers excellent corrosion resistance, superior formability and strength between grades 1 and 3. It’s a widely used grade that offers a yield strength of 275MPa (40ksi) minimum.

CHEMICAL COMPOSITION OF CP TITANIUM GRADE 2 – ASTM B 348 (99)

• Carbon 0.08 max
• Nitrogen 0.030 max
• Oxygen 0.25 max
• Iron 0.30 max
• Hydrogen 0.015 max
• Others, individual 0.1 max
• Others, combined 0.4 max
• Titanium balance

CHEMICAL COMPOSITION OF CP TITANIUM GRADE 2 – ASTM F 67-100

• Carbon 0.8 max
• Nitrogen 0.030 max
• Oxygen 0.25 max
• Iron 0.30 max
• Hydrogen 0.015 max
• Titanium balance

HEAT TREATMENT OF CP TITANIUM GRADE 2

• Anneal
  • Hold at 1103° to 1400F (595° to 760°C) for two hours
  • Air cool
  • Stress relive by holding at 1004° to 1103°F (540° to 595°C) for 15 to 30 minutes
  • Air cool
• Intermediate and final annealing in inert gas or vacuum
• Perform final heat treatments in vacuum

APPLICATIONS OF CP TITANIUM GRADE 2

• Aerospace industry
• Chemical and marine applications
• Electroplating industry
• Medical industry

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.

       .AVAILABLE IN STOCK.              

Features

• Fittings : ASME SB-363

• Forgings : ASME SB-381

• Pipe : ASME SB-337, ASME SB-338

• Round Bar/Wire : ASME SB-348

• Sheet/Plate : ASME SB-265

• Tube : ASME SB-337, ASME SB-338

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.

       .AVAILABLE IN STOCK.              

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Features

• Fittings : ASME SB-363
• Forgings : ASME SB-381
• Pipe : ASME SB-337, ASME SB-338
• Round Bar/Wire : ASME SB-348, ASTM F-67
• Sheet/Plate : ASME SB-265
• Tube : ASME SB-337, ASME SB-338

Features

• Forgings : ASME SB-381

• Pipe : ASME SB-337

• Round Bar : ASME SB-348

• Sheet/Plate : ASME SB-265

• Tube : AMS 4943, AMS 4944, ASME SB-338

Features

• Forgings : MIL-T-9046, MIL-T-9047

• Round : AMS 4971, AMS 4978, AMS 4979

• Sheet/Plate : AMS 4918

Titanium Grade 2 has moderate strength with excellent cold form-ability, weld-ability. This titanium also has excellent resistance to high oxidization.Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specifications-

Sheet/Plate : ASME SB-265, AMS 4902
Round Bar/Wire : ASME SB-348,ASTM F-67, AMS 4921
Pipe : ASME SB-337, ASME SB-338
Tube : ASME SB-337, ASME SB-338b, AMS 4942
Fittings : ASME SB-363
Forgings : ASME SB-381

Chemical Composition

The following table shows the chemical composition of grade 450 stainless steel alloy.

Physical Properties

The physical properties of grade 450 stainless steel alloy are displayed in the following table.

Mechanical Properties

The following table outlines the mechanical properties of grade 450 stainless steel alloy.

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .

SIZE 0.5MM TO 6MM DIA WIRE.

      .AVAILABLE IN STOCK.                       

Additional Information:

• Minimum Order Quantity: 10 kg

Titanium Grade 5/Titanium 6AL4V is heat treatable and has high strength and ductility along with good weld-ability and fabric-ability. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specifications-

Sheet/Plate : ASME SB-265, AMS 4911
Round Bar : ASME SB-348, AMS 4928, AMS 4965, AMS 4967
Forgings : MIL-T-9046, MIL-T-9047

Chemical Composition

The following table shows the chemical composition of grade 450 stainless steel alloy.

Physical Properties

The physical properties of grade 450 stainless steel alloy are displayed in the following table.

Mechanical Properties

The following table outlines the mechanical properties of grade 450 stainless steel alloy.

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .

SIZE 0.5MM TO 6MM DIA WIRE.

.AVAILABLE IN STOCK.

Additional Information:

• Minimum Order Quantity: 10 Kg

Titanium Grade 7 is the most resistant to corrosion in reducing acids with physical/mechanical properties equivalent to Gr. 2. Grade 7 also has excellent weld-ability and fabric-ability. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specifications-

Sheet/Plate : ASME SB-265
Round Bar : ASME SB-348
Pipe : ASME SB-337, ASME SB-338
Tube : ASME SB-337, ASME SB-338
Fittings : ASME SB-363
Forgings : ASME SB-381

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

SIZE 0.5MM TO 6MM DIA WIRE.

          .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kg