Monel Products

Rene 41® is a nickel-chromium alloy that contains cobalt, molybdenum and some aluminum and titanium. Rene 41® has a high corrosion resistance, which makes Rene 41® usable to aircraft engine components such as turbine blades, wheels, combustion chamber liners and structural hardware. Rene 41®’s specifications are AMS 5545, AMS 5712 and AMS 5713. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

                  .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Rene 41 is a nickel-chromium alloy that contains cobalt, molybdenum and some aluminum and titanium. Rene 41 has a high corrosion resistance, which makes Rene 41 usable to aircraft engine components such as turbine blades, wheels, combustion chamber liners and structural hardware. Rene 41s specifications are AMS 5545, AMS 5712 and AMS 5713. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges. Specification Sheet AMS 5544 Round Bar/Wire AMS 5706, AMS 5708, AMS 5709, ASTM B-637 C MN P S Si Cr Ni Mo Cu Co Cb Ti Al Fe B Zr .05 - .12 0.10 max .015 max 0.5 18.0 - 20.0 bal 9.0 - 10.5 10.0 - 12.0 3.0 - 3.30 1.40 - 1.60 5.0 max .003 - .010 SIZE 0.5MM TO 6MM DIA WIRE. .AVAILABLE IN STOCK.

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Monel K-500® is a nickel-copper alloy with the same corrosion resistance and characteristics as the Monel 400®. The Monel K-500® has a greater strength and hardness then the 400, as a result of added aluminum and titanium. In age-hardened condition, it has greater tendency toward stress- corrosion cracking in some environments.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

 

                  .AVAILABLE IN STOCK. 

Additional Information:

• Item Code: N05500
• Minimum Order Quantity: 10 kg

Monel R-405®is very similar to Monel R405®except for its greater sulfur content. Monel R-405® also has the same corrosion resistance and physical properties as the Monel R405® with a slightly different range of mechanical properties. Monel R-405® was developed for good machinability.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

 

                  .AVAILABLE IN STOCK. 

Additional Information:

• Item Code: N04405
• Minimum Order Quantity: 10 Kilogram(s)

Monel 400® is a nickel-copper alloy that is hardened by cold working only. Monel 400® has low corrosion rate in flowing seawater, therefore it is widely used in marine applications. Monel 400® also has excellent resistance to stress corrosion cracking in most freshwater. Monel 400® can be used in temperatures up to 1000 ºF. The alloy has great mechanical properties at subzero temperatures.

 

Monel 400® sheet is available in thicknesses ranging from .018 to .140". Monel 400® strip in coil from is available in lighter gauges up 24" wide. Monel 400® plate is available up 3" thick.

 

Monel 400® bar is available in wrought bar up to 11" diameter and larger sizes and shapes may be forged to order. Monel 400® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Monel 400® tubing is available up 3". Monel 400® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

 

                  .AVAILABLE IN STOCK. 

 

Additional Information:

• Item Code: N04400
• Minimum Order Quantity: 10 kgs

Monel K-500® is a nickel-copper alloy with the same corrosion resistance and characteristics as the Monel 400®. The Monel K-500® has a greater strength and hardness then the 400, as a result of added aluminum and titanium. In age-hardened condition, it has greater tendency toward stress- corrosion cracking in some environments.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

                  .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 kgs

Monel K-500® is a nickel-copper alloy with the same corrosion resistance and characteristics as the Monel 400®. The Monel K-500® has a greater strength and hardness then the 400, as a result of added aluminum and titanium. In age-hardened condition, it has greater tendency toward stress- corrosion cracking in some environments.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE 0.5MM TO 6MM DIA WIRE.

       .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 KGS

Monel K-500® is a nickel-copper alloy with the same corrosion resistance and characteristics as the Monel 400®. The Monel K-500® has a greater strength and hardness then the 400, as a result of added aluminum and titanium. In age-hardened condition, it has greater tendency toward stress- corrosion cracking in some environments.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

                  .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 KGS

Monel R-405®is very similar to Monel R405®except for its greater sulfur content. Monel R-405® also has the same corrosion resistance and physical properties as the Monel R405® with a slightly different range of mechanical properties. Monel R-405® was developed for good machinability.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:
Sheet/Plate QQ-N-281

Round Bar/Wire ASME SB-164, AMS 4674, QQ-N-281

Pipe

Tube

Fittings

Forgings QQ-N-281

C MN P S Si Cr Ni Mo Cu Co Cb Ta Ti Al Fe

.3 max 2.0 max .025-.060max .5 max 63.0 min 28-34 max 2.5 max

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

                  .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 kgs

Monel R-405®is very similar to Monel R405®except for its greater sulfur content. Monel R-405® also has the same corrosion resistance and physical properties as the Monel R405® with a slightly different range of mechanical properties. Monel R-405® was developed for good machinability.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

                  .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Monel R-405®is very similar to Monel R405®except for its greater sulfur content. Monel R-405® also has the same corrosion resistance and physical properties as the Monel R405® with a slightly different range of mechanical properties. Monel R-405® was developed for good machinability.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

                  .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Monel R-405®is very similar to Monel R405®except for its greater sulfur content. Monel R-405® also has the same corrosion resistance and physical properties as the Monel R405® with a slightly different range of mechanical properties. Monel R-405® was developed for good machinability.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE 0.5MM TO 6MM DIA WIRE.

          .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 kgs

Monel 400® is a nickel-copper alloy that is hardened by cold working only. Monel 400® has low corrosion rate in flowing seawater, therefore it is widely used in marine applications. Monel 400® also has excellent resistance to stress corrosion cracking in most freshwater. Monel 400® can be used in temperatures up to 1000 ºF. The alloy has great mechanical properties at subzero temperatures.

 

Monel 400® sheet is available in thicknesses ranging from .018 to .140". Monel 400® strip in coil from is available in lighter gauges up 24" wide. Monel 400® plate is available up 3" thick.

 

Monel 400® bar is available in wrought bar up to 11" diameter and larger sizes and shapes may be forged to order. Monel 400® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Monel 400® tubing is available up 3". Monel 400® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

               .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Monel 400® is a nickel-copper alloy that is hardened by cold working only. Monel 400® has low corrosion rate in flowing seawater, therefore it is widely used in marine applications. Monel 400® also has excellent resistance to stress corrosion cracking in most freshwater. Monel 400® can be used in temperatures up to 1000 ºF. The alloy has great mechanical properties at subzero temperatures.

 

Monel 400® sheet is available in thicknesses ranging from .018 to .140". Monel 400® strip in coil from is available in lighter gauges up 24" wide. Monel 400® plate is available up 3" thick.

 

Monel 400® bar is available in wrought bar up to 11" diameter and larger sizes and shapes may be forged to order. Monel 400® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Monel 400® tubing is available up 3". Monel 400® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

                  .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 KGS

Monel 400® is a nickel-copper alloy that is hardened by cold working only. Monel 400® has low corrosion rate in flowing seawater, therefore it is widely used in marine applications. Monel 400® also has excellent resistance to stress corrosion cracking in most freshwater. Monel 400® can be used in temperatures up to 1000 ºF. The alloy has great mechanical properties at subzero temperatures.

 

Monel 400® sheet is available in thicknesses ranging from .018 to .140". Monel 400® strip in coil from is available in lighter gauges up 24" wide. Monel 400® plate is available up 3" thick.

 

Monel 400® bar is available in wrought bar up to 11" diameter and larger sizes and shapes may be forged to order. Monel 400® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Monel 400® tubing is available up 3". Monel 400® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE 0.5MM TO 6MM DIA WIRE.

          .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 KGS

Monel 400® is a nickel-copper alloy that is hardened by cold working only. Monel 400® has low corrosion rate in flowing seawater, therefore it is widely used in marine applications. Monel 400® also has excellent resistance to stress corrosion cracking in most freshwater. Monel 400® can be used in temperatures up to 1000 ºF. The alloy has great mechanical properties at subzero temperatures.

 

Monel 400® sheet is available in thicknesses ranging from .018 to .140". Monel 400® strip in coil from is available in lighter gauges up 24" wide. Monel 400® plate is available up 3" thick.

 

Monel 400® bar is available in wrought bar up to 11" diameter and larger sizes and shapes may be forged to order. Monel 400® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Monel 400® tubing is available up 3". Monel 400® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

                  .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 KGS

Features

• Forgings : QQ N 286, AMS 4676

• Round Bar : ASME SB-865, AMS 4676, QQ N 286

• Sheet/Plate : QQ N 286

MONEL® alloy K-500 (UNS N05500/ W.Nr. 2.4375) is a nickel-copper alloy which combines the excellent corrosion resistance of MONEL alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. The thermal processing used to effect precipitation is commonly called age hardening or aging. The composition of the alloy is given in Table 1. Typical applications for MONEL alloy K-500 products are chains and cables, fasteners and springs for marine service; pump and valve components for chemical processing; doctor blades and scrapers for pulp processing in paper production; oil well drill collars and instruments, pump shafts and impellers, non-magnetic housings, safety lifts and valves for oil and gas production; and sensors and other electronic components.

Chemical Composition, %, of MONEL Alloy K-500
Nickel (plus Cobalt) .....................................................63.0 min. Carbon........................................................................0.25 max.
Manganese ...................................................................1.5 max. Iron................................................................................2.0 max.
Sulfur ..........................................................................0.01 max.
Silicon ...........................................................................0.5 max.
Copper ......................................................................27.0 - 33.0
Aluminum ..................................................................2.30 - 3.15
Titanium ....................................................................0.35 - 0.85 

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 

 

                  .AVAILABLE IN STOCK.  

Additional Information:

• Minimum Order Quantity: 10 KGS

Monel K-500® is a nickel-copper alloy with the same corrosion resistance and characteristics as the Monel 400®. The Monel K-500® has a greater strength and hardness then the 400, as a result of added aluminum and titanium. In age-hardened condition, it has greater tendency toward stress- corrosion cracking in some environments.
 
Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:
Sheet/PlateQQ N 286Round Bar/WireASME SB-865, AMS 4676, QQ N 286PipeTubeFittingsForgingsQQ N 286, AMS 4676CMNPSSiCrNiMoCuCoCb TaTiAlFe.25 max1.5 max.01 max.5 max63.0 min27 - 33 max.35 - .852.30 - 3.152.0 max
SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE AVAILABLE WITH US IN STOCK. 
                  .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 KGS