Additional Information:
Incoloy™ 925 offers exceptional strength up to 1000°F (538°C). It’s a nickel-iron-chromium, age-hardenable alloy ideal for applications that require resistance to corrosion and pitting. Machinable and weldable, Incoloy™ 925 can be not and cold worked.
CHEMICAL COMPOSITION OF INCOLOY™ 925SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.
.AVAILABLE IN STOCK.
Additional Information:
The alloy finds use in high temperature applications such as heat exchangers and gas turbine components. Because of its good corrosion resistance it is also used in wet scrubbers and some acid process equipment.
MACHINABILITYMay be machined by conventional means. However the alloy tends to work harden ahead of cutting and rigid tooling is essential to avoid chatter and work hardening in front of the tool edge.
FORMINGThis alloy can be cold formed by conventional means and tooling. The alloy does work harden during cold working with an attendant increase in strength. This increase in strength may be of value for moderate temperature applications and, in these instances, the formed parts can be left in the cold work hardened condition.
HEAT TREATMENTThe alloy is furnished in the solution annealed condition. This is done at 2150 F for sufficient time dependent upon section thickness. Following the anneal the alloy may be air cooled.
FORGINGHot forging can be done by heating the billet to 2100 – 2150 F, but not over 2150. Heavy forging may then be done down to a billet temperature of 1850 F and light forging down to 1700 F. Final reductions of 15 to 20% minimum are recommended to maintain.
ANNEALINGBecause the alloy work hardens during hot or cold forming it may be necessary to anneal such parts in order to complete forming operations. Annealing is done at 1800 to 2000 F and air cooled. Stress relief of cold worked parts may be accomplished at 110.
SIZE 6MM TO 350MM OD PIPE.
SIZE 0.5MM TO 6MM DIA WIRE.
.AVAILABLE IN STOCK.
Additional Information:
SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.
Additional Information:
Incoloy™ 925 offers exceptional strength up to 1000°F (538°C). It’s a nickel-iron-chromium, age-hardenable alloy ideal for applications that require resistance to corrosion and pitting. Machinable and weldable, Incoloy™ 925 can be not and cold worked.
CHEMICAL COMPOSITION OF INCOLOY™ 925SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.
.AVAILABLE IN STOCK.
Additional Information:
Inconel 713C offers outstanding resistance to thermal fatigue and good castability while offering exceptional rupture strength at 1700°F (927°C). Inconel 713C is a nickel-chromium alloy that is ideally suited for jet engine gas turbine blades.
CHEMICAL COMPOSITION OF INCONEL™ 713CSIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.
.AVAILABLE IN STOCK.
Additional Information:
SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.
Additional Information:
.AVAILABLE IN STOCK.
Additional Information:
Incoloy™ 925 offers exceptional strength up to 1000°F (538°C). It’s a nickel-iron-chromium, age-hardenable alloy ideal for applications that require resistance to corrosion and pitting. Machinable and weldable, Incoloy™ 925 can be not and cold worked.
CHEMICAL COMPOSITION OF INCOLOY™ 925SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.
.AVAILABLE IN STOCK.
Additional Information: