Incoloy Products

Incoloy 800HT® is nickel-iron-chromium alloy. The alloys’ higher creep-rupture strength is the result of aluminum, carbon and titanium contents. Incoloy 800HT® is used in chemical and petrochemical processing, in power plants, industrial furnaces and for heat treating equipment. Incoloy 800HT® sheet is available in thicknesses ranging from .020 to .156". Incoloy 800HT® strip in coil from is available in lighter gauges up 12" wide. Incoloy 800HT plate is available up 2" thickness. Incoloy 800HT® bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order. Incoloy 800HT® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT® tubing is available up 3" OD. Incoloy 800HT® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE AVAILABILITY
ALMOST ALL THE SIZES AVAILABLE IN STOCK
.AVAILABLE IN STOCK.

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Incoloy 800HT® is nickel-iron-chromium alloy. The alloys’ higher creep-rupture strength is the result of aluminum, carbon and titanium contents. Incoloy 800HT® is used in chemical and petrochemical processing, in power plants, industrial furnaces and for heat treating equipment. Incoloy 800HT® sheet is available in thicknesses ranging from .020 to .156". Incoloy 800HT® strip in coil from is available in lighter gauges up 12" wide. Incoloy 800HT plate is available up 2" thickness. Incoloy 800HT® bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order. Incoloy 800HT® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT® tubing is available up 3" OD. Incoloy 800HT® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:
SIZE AVAILABILITY
ALMOST ALL SIZES IS COVERED IN OUR STOCK.

Additional Information:

• Minimum Order Quantity: 10 KGS

Incoloy 825® is a nickel-iron- chromium alloy with titanium, copper and molybdenum. Incoloy® 825’s chemical composition provides great resistance to many corrosive environments, such as pitting, crevice corrosion, inter-granular corrosion and stress- corrosion cracking. Incoloy 825® has good mechanical properties from moderately to high temperatures. The hot- working range for Incoloy 825® is 1600 to 2150º F. The material has good weld-ability by all conventional processes. Incoloy 825® sheet is available in thicknesses ranging from .020 to .156". Incoloy 825® strip in coil from is available in lighter gauges up 12" wide. Incoloy 825® plate is available up 3" thickness. Incoloy 825® bar is available in wrought bar up to 6" diameter and larger sizes and shapes may be forged to order. Incoloy 825® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 825® tubes are available up to 1-1/2" OD. Incoloy 825® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Incoloy 825® is commonly welded with Inconel® Filler Metal 112 (ERNiCrMo-3) or Inconel® Electrode 112 (ENiCrMo-3). For overlay cladding where identical chemistry is required, Incoloy 825® MIG filler metal AWS A5.14 ERNiFeCr-1 is used. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
WIRE:FROM 0.1MM TO 10MM THICKNESS           
             .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Incoloy® 800/800H/800HT
UNS N08800/N08810/N08811
Werkstoff Nr. 1.4876, 1.4958, 1.4959 Common Trade Names: Incoloy 800®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220

Incoloy 800HT® is nickel-iron-chromium alloy. The alloys’ higher creep-rupture strength is the result of aluminum, carbon, and titanium contents. Incoloy 800HT® is used in chemical and petrochemical processing, in power plants, industrial furnaces, and for heat treating equipment.

Incoloy 800HT® sheet is available in thicknesses ranging from .020 to .156". Incoloy 800HT® strip in coil from is available in lighter gauges up 12" wide. Incoloy 800HT plate is available up 2" thick.

Incoloy 800HT® bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order.

Incoloy 800HT® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT® tubing is available up 3" OD. Incoloy 800HT® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.

Butt-weld and forged fittings are available or can be manufactured with short lead times.

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
WIRE:FROM 0.1MM TO 10MM THICKNESS            
             .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 kgs

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .

SIZE 0.5MM TO 6MM DIA WIRE.

                     .AVAILABLE IN STOCK.              

Additional Information:

• Minimum Order Quantity: 10 kgs

Features

• Forgings : ASME SB-637, AMS 5667, AMS 5668, AMS 5670, AMS 5671, AMS 5747

• Round Bar/Wire : ASME SB-637, AMS 5669, AMS 5698, AMS 5699

• Sheet/Plate : AMS 5542, AMS 5598

• Tube : AMS 5582, AMS 5583

INCONEL® alloy X-750 (UNS N07750/W. Nr. 2.4669) is a precipitation-hardenable nickel-chromium alloy used for its corrosion and oxidation resistance and high strength at temperatures to 1300°F. Although much of the effect of precipitation hardening is lost with increasing temperature over 1300°F, heat-treated material has useful strength up to 1800°F. Alloy X-750 also has excellent properties down to cryogenic termperatures. Composition is shown in Table 1. The economics of INCONEL alloy X-750 coupled with its availability in all standard mill forms has resulted in applications in a wide variety of industrial fields. In gas turbines, it is used for rotor blades and wheels, bolts, and other structural members. INCONEL alloy X-750 is used extensively in rocket-engine thrust chambers. Airframe applications include thrust reversers and hot-air ducting systems. Large pressure vessels are formed from INCONEL alloy X-750. Other applications are heat-treating fixtures, forming tools, extrusion dies, and test machine grips. For springs and fasteners, INCONEL alloy X-750 is used from sub-zero to 1200°F.

CHEMICAL COMPOSITION
Chemical Composition, %
Nickel (plus Cobalt)....................................................70.00 min. Chromium...................................................................14.0-17.0 Iron..................................................................................5.0-9.0 Titanium.......................................................................2.25-2.75 Aluminum....................................................................0.40-1.00
Niobium (plus Tantalum)..............................................0.70-1.20 Manganese.................................................................1.00 max. Silicon.........................................................................0.50 max. Sulfur...........................................................................0.01 max. Copper........................................................................0.50 max. Carbon........................................................................0.08 max.
Cobalt1 ......................................................................1.00 max

SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
             .AVAILABLE IN STOCK.

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Product Details:

INVAR 36

INVAR 36 is a nickel-iron, low-expansion alloy containing 36% nickel. It maintains nearly constant dimensions over the range of normal atmospheric temperatures, and has a low coefficient of expansion from cryogenic temperatures to about 500°F. The alloy also retains good strength and toughness at cryogenic temperatures.

INVAR 36 can be hot and cold formed and machined using processes similar to austenitic stainless steels. INVAR 36 is weldable using Filler Metal CF36 which is available in bare wire for both the GTAW and GMAW process.

Chemistry

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .

SIZE 0.5MM TO 6MM DIA WIRE.

       .AVAILABLE IN STOCK.

Features

• Fittings : ASME SB-366

• Forgings : ASME SB-564, ASME SB-564

• Pipe : ASME SB-407, ASME SB-829, ASME SB-514, ASME SB-775

• Round Bar : ASME SB-408, AMS 5766

• Sheet/Plate : ASME SB-409, ASME SB-409

• Tube : ASME SB-407, ASME SB-829, ASME SB-515, ASME SB-751

Chemical CompositionAlloy 800 (UNS N08800) Chemical Composition, %

The chemical composition of Alloy 800 is:

Alloy 800H (UNS N08810) Chemical Composition, %

The chemical composition of alloy 800H is:

Alloy 800HT (UNS N08811) Chemical Composition, %

The chemical composition of Alloy 800HT is :

Forms of INCOLOY 800H/800HT

The forms of INCOLOY 800H/800HT are:

• Sheet
• Plate
• Bar
• Pipe & Tube (welded & seamless)
• Fittings (i.e., flanges, slip-ons, blinds, weld-necks, lap joints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
• Wire.

SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
.AVAILABLE IN STOCK.

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Incoloy® 800/800H/800HT
UNS N08800/N08810/N08811
Werkstoff Nr. 1.4876, 1.4958, 1.4959 Common Trade Names: Incoloy 800®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220
Incoloy 800HT® is nickel-iron-chromium alloy. The alloys’ higher creep-rupture strength is the result of aluminum, carbon, and titanium contents. Incoloy 800HT® is used in chemical and petrochemical processing, in power plants, industrial furnaces, and for heat treating equipment.
Incoloy 800HT® sheet is available in thicknesses ranging from .020 to .156". Incoloy 800HT® strip in coil from is available in lighter gauges up 12" wide. Incoloy 800HT plate is available up 2" thick.
Incoloy 800HT® bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order.
Incoloy 800HT® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT® tubing is available up 3" OD. Incoloy 800HT® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.
Butt-weld and forged fittings are available or can be manufactured with short lead times.
Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:
Sheet/PlateASTM B409, AMS 5877, BS 3072NA15, BS 3073NA15, VdTüV 412 & 434, DIN 17460, EN 10028-7, EN 10095Round Bar/WireASTM B408, AMS 5766, ISO 9723, ISO 9724, BS 3076NA15, BS 3075NA15, EN 10095, VdTüV 412 & 434Pipe & TubeASTM B407, ASTM B829, ASTM B514, ASTM B775, ASTM B515, ASTM B751, BS3 3074NA15, ISO 6207, DIN 17459, VdTüV 412 & 434FittingsASTM B366ForgingsASTM B564, AMS 5766, ISO 9725Weld WireAWS A5.11 ENiCrFe-2, AWS A5.14 ERNiCr-3C.10 maxMNPSSiCr19.0 - 23.0Ni30.0 -35.0MoCuCoCb TaTi0.15 - 0.60Al0.15- 0.60Fe39.5 minAl Ti0.30- 1.20Grain
SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
.AVAILABLE IN STOCK.

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Incoloy 800HT® is nickel-iron-chromium alloy. The alloys’ higher creep-rupture strength is the result of aluminum, carbon and titanium contents. Incoloy 800HT® is used in chemical and petrochemical processing, in power plants, industrial furnaces and for heat treating equipment. Incoloy 800HT® sheet is available in thicknesses ranging from .020 to .156". Incoloy 800HT® strip in coil from is available in lighter gauges up 12" wide. Incoloy 800HT plate is available up 2" thickness. Incoloy 800HT® bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order. Incoloy 800HT® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT® tubing is available up 3" OD. Incoloy 800HT® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZES AVAILABLE
PIPE:FROM 6MM OD TO 350MM OD AVAILABLE WITH US IN STOCK. 

Additional Information:

• Item Code: N08800
• Minimum Order Quantity: 10 kg

Incoloy 800HT® is nickel-iron-chromium alloy. The alloys’ higher creep-rupture strength is the result of aluminum, carbon and titanium contents. Incoloy 800HT® is used in chemical and petrochemical processing, in power plants, industrial furnaces and for heat treating equipment. Incoloy 800HT® sheet is available in thicknesses ranging from .020 to .156". Incoloy 800HT® strip in coil from is available in lighter gauges up 12" wide. Incoloy 800HT plate is available up 2" thickness. Incoloy 800HT® bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order. Incoloy 800HT® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT® tubing is available up 3" OD. Incoloy 800HT® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
SHEET:FROM 0.1 TO 3MM THICKNESS.
         .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kg

Incoloy 800HT® is nickel-iron-chromium alloy. The alloys’ higher creep-rupture strength is the result of aluminum, carbon and titanium contents. Incoloy 800HT® is used in chemical and petrochemical processing, in power plants, industrial furnaces and for heat treating equipment. Incoloy 800HT® sheet is available in thicknesses ranging from .020 to .156". Incoloy 800HT® strip in coil from is available in lighter gauges up 12" wide. Incoloy 800HT plate is available up 2" thickness. Incoloy 800HT® bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order. Incoloy 800HT® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT® tubing is available up 3" OD. Incoloy 800HT® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
             .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Incoloy 800HT® is nickel-iron-chromium alloy. The alloys’ higher creep-rupture strength is the result of aluminum, carbon and titanium contents. Incoloy 800HT® is used in chemical and petrochemical processing, in power plants, industrial furnaces and for heat treating equipment. Incoloy 800HT® sheet is available in thicknesses ranging from .020 to .156". Incoloy 800HT® strip in coil from is available in lighter gauges up 12" wide. Incoloy 800HT plate is available up 2" thickness. Incoloy 800HT® bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order. Incoloy 800HT® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT® tubing is available up 3" OD. Incoloy 800HT® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZES AVAILABLE
PIPE:FROM 6MM OD TO 350MM OD AVAILABLE WITH US IN STOCK. 

Additional Information:

• Item Code: N08811
• Minimum Order Quantity: 10 Kg

Incoloy 800HT® is nickel-iron-chromium alloy. The alloys’ higher creep-rupture strength is the result of aluminum, carbon and titanium contents. Incoloy 800HT® is used in chemical and petrochemical processing, in power plants, industrial furnaces and for heat treating equipment. Incoloy 800HT® sheet is available in thicknesses ranging from .020 to .156". Incoloy 800HT® strip in coil from is available in lighter gauges up 12" wide. Incoloy 800HT plate is available up 2" thickness. Incoloy 800HT® bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order. Incoloy 800HT® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT® tubing is available up 3" OD. Incoloy 800HT® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
             .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Incoloy 800HT® is nickel-iron-chromium alloy. The alloys’ higher creep-rupture strength is the result of aluminum, carbon and titanium contents. Incoloy 800HT® is used in chemical and petrochemical processing, in power plants, industrial furnaces and for heat treating equipment. Incoloy 800HT® sheet is available in thicknesses ranging from .020 to .156". Incoloy 800HT® strip in coil from is available in lighter gauges up 12" wide. Incoloy 800HT plate is available up 2" thickness. Incoloy 800HT® bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order. Incoloy 800HT® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT® tubing is available up 3" OD. Incoloy 800HT® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

 

Specification:

SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
             .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Incoloy 825® is a nickel-iron- chromium alloy with titanium, copper and molybdenum. Incoloy® 825’s chemical composition provides great resistance to many corrosive environments, such as pitting, crevice corrosion, inter-granular corrosion and stress- corrosion cracking. Incoloy 825® has good mechanical properties from moderately to high temperatures. The hot- working range for Incoloy 825® is 1600 to 2150º F. The material has good weld-ability by all conventional processes. Incoloy 825® sheet is available in thicknesses ranging from .020 to .156". Incoloy 825® strip in coil from is available in lighter gauges up 12" wide. Incoloy 825® plate is available up 3" thickness. Incoloy 825® bar is available in wrought bar up to 6" diameter and larger sizes and shapes may be forged to order. Incoloy 825® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 825® tubes are available up to 1-1/2" OD. Incoloy 825® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Incoloy 825® is commonly welded with Inconel® Filler Metal 112 (ERNiCrMo-3) or Inconel® Electrode 112 (ENiCrMo-3). For overlay cladding where identical chemistry is required, Incoloy 825® MIG filler metal AWS A5.14 ERNiFeCr-1 is used. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
             .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kg

Incoloy 825® is a nickel-iron- chromium alloy with titanium, copper and molybdenum. Incoloy® 825’s chemical composition provides great resistance to many corrosive environments, such as pitting, crevice corrosion, inter-granular corrosion and stress- corrosion cracking. Incoloy 825® has good mechanical properties from moderately to high temperatures. The hot- working range for Incoloy 825® is 1600 to 2150º F. The material has good weld-ability by all conventional processes. Incoloy 825® sheet is available in thicknesses ranging from .020 to .156". Incoloy 825® strip in coil from is available in lighter gauges up 12" wide. Incoloy 825® plate is available up 3" thickness. Incoloy 825® bar is available in wrought bar up to 6" diameter and larger sizes and shapes may be forged to order. Incoloy 825® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 825® tubes are available up to 1-1/2" OD. Incoloy 825® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Incoloy 825® is commonly welded with Inconel® Filler Metal 112 (ERNiCrMo-3) or Inconel® Electrode 112 (ENiCrMo-3). For overlay cladding where identical chemistry is required, Incoloy 825® MIG filler metal AWS A5.14 ERNiFeCr-1 is used. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
             .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Incoloy 825® is a nickel-iron- chromium alloy with titanium, copper and molybdenum. Incoloy® 825’s chemical composition provides great resistance to many corrosive environments, such as pitting, crevice corrosion, inter-granular corrosion and stress- corrosion cracking. Incoloy 825® has good mechanical properties from moderately to high temperatures. The hot- working range for Incoloy 825® is 1600 to 2150º F. The material has good weld-ability by all conventional processes. Incoloy 825® sheet is available in thicknesses ranging from .020 to .156". Incoloy 825® strip in coil from is available in lighter gauges up 12" wide. Incoloy 825® plate is available up 3" thickness. Incoloy 825® bar is available in wrought bar up to 6" diameter and larger sizes and shapes may be forged to order. Incoloy 825® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 825® tubes are available up to 1-1/2" OD. Incoloy 825® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Incoloy 825® is commonly welded with Inconel® Filler Metal 112 (ERNiCrMo-3) or Inconel® Electrode 112 (ENiCrMo-3). For overlay cladding where identical chemistry is required, Incoloy 825® MIG filler metal AWS A5.14 ERNiFeCr-1 is used. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
             .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Incoloy® 800/800H/800HT
UNS N08800/N08810/N08811
Werkstoff Nr. 1.4876, 1.4958, 1.4959 Common Trade Names: Incoloy 800®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220

Incoloy 800HT® is nickel-iron-chromium alloy. The alloys’ higher creep-rupture strength is the result of aluminum, carbon, and titanium contents. Incoloy 800HT® is used in chemical and petrochemical processing, in power plants, industrial furnaces, and for heat treating equipment.

Incoloy 800HT® sheet is available in thicknesses ranging from .020 to .156". Incoloy 800HT® strip in coil from is available in lighter gauges up 12" wide. Incoloy 800HT plate is available up 2" thick.

Incoloy 800HT® bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order.

Incoloy 800HT® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT® tubing is available up 3" OD. Incoloy 800HT® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.

Butt-weld and forged fittings are available or can be manufactured with short lead times.

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
SHEET:FROM 0.1MM TO 3MM THICKNESS            
            .AVAILABLE IN STOCK. 

Additional Information:

• Minimum Order Quantity: 10 Kg

Incoloy® 800/800H/800HT
UNS N08800/N08810/N08811
Werkstoff Nr. 1.4876, 1.4958, 1.4959 Common Trade Names: Incoloy 800®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220
Incoloy 800HT® is nickel-iron-chromium alloy. The alloys’ higher creep-rupture strength is the result of aluminum, carbon, and titanium contents. Incoloy 800HT® is used in chemical and petrochemical processing, in power plants, industrial furnaces, and for heat treating equipment.
Incoloy 800HT® sheet is available in thicknesses ranging from .020 to .156". Incoloy 800HT® strip in coil from is available in lighter gauges up 12" wide. Incoloy 800HT plate is available up 2" thick.
Incoloy 800HT® bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order.
Incoloy 800HT® seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT® tubing is available up 3" OD. Incoloy 800HT® redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.
Butt-weld and forged fittings are available or can be manufactured with short lead times.
Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:
Sheet/PlateASTM B409, AMS 5877, BS 3072NA15, BS 3073NA15, VdTüV 412 & 434, DIN 17460, EN 10028-7, EN 10095Round Bar/WireASTM B408, AMS 5766, ISO 9723, ISO 9724, BS 3076NA15, BS 3075NA15, EN 10095, VdTüV 412 & 434Pipe & TubeASTM B407, ASTM B829, ASTM B514, ASTM B775, ASTM B515, ASTM B751, BS3 3074NA15, ISO 6207, DIN 17459, VdTüV 412 & 434FittingsASTM B366ForgingsASTM B564, AMS 5766, ISO 9725Weld WireAWS A5.11 ENiCrFe-2, AWS A5.14 ERNiCr-3C.10 maxMNPSSiCr19.0 - 23.0Ni30.0 -35.0MoCuCoCb TaTi0.15 - 0.60Al0.15- 0.60Fe39.5 minAl Ti0.30- 1.20Grain
SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
PIPE:FROM 6MM OD TO 350MM OD & ALL SCHDULE AVAILABLE.
               .AVAILABLE IN STOCK.

Additional Information:

• Minimum Order Quantity: 10 Kg

Features

• Fittings : ASME SB-366

• Forgings : ASME SB-564

• Pipe : ASME SB-423, ASME SB-829, ASME SB-705, ASME SB-775

• Round Bar/Wire : ASME SB-425

• Sheet/Plate : ASME SB-424

• Tube : ASME SB-163, ASME SB-704, ASME SB-751

INCOLOY® alloy 825 (UNS N08825/W.Nr. 2.4858) is a nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium. The alloy’s chemical composition, given in Table 1, is designed to provide exceptional resistance to many corrosive environments. The nickel content is sufficient for resistance to chloride-ion stress-corrosion cracking. The nickel, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulfuric and phosphoric acids. The molybdenum also aids resistance to pitting and crevice corrosion. The alloy’s chromium content confers resistance to a variety of oxidizing substances such as nitric acid, nitrates and oxidizing salt. The titanium addition serves, with an appropriate heat treatment, to stabilize the alloy against sensitization to intergranular corrosion. The resistance of INCOLOY alloy 825 to general and localized corrosion under diverse conditions gives the alloy broad usefulness. Applications include chemical processing, pollution control, oil and gas recovery, acid production, pickling operations, nuclear fuel reprocessing, and handling of radioactive wastes. Applications for alloy 825 are similar to those for INCOLOY alloy 020. Table 1 -

Chemical Composition, % of INCOLOY alloy 825

Nickel ..........................................................................38.0-46.0 Iron...............................................................................22.0 min. Chromium....................................................................19.5-23.5
Molybdenum ...................................................................2.5-3.5
Copper ............................................................................1.5-3.0 Titanium...........................................................................0.6-1.2 Carbon........................................................................0.05 max.
Manganese ...................................................................1.0 max.
Sulfur ..........................................................................0.03 max.
Silicon ...........................................................................0.5 max. Aluminum......................................................................0.2 max.

Additional Information:

• Minimum Order Quantity: 10 Kilogram

INCONEL® nickel-chromium alloy 625 (UNS N06625/W.Nr. 2.4856) is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance. Service temperatures range from cryogenic to 1800°F (982°C). Composition is shown in Table 1. Strength of INCONEL alloy 625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix; thus precipitationhardening treatments are not required. This combination of elements also is responsible for superior resistance to a wide range of corrosive environments of unusual severity as well as to high-temperature effects such as oxidation and carburization. The properties of INCONEL alloy 625 that make it an excellent choice for sea-water applications are freedom from local attack (pitting and crevice corrosion), high corrosion-fatigue strength, high tensile strength, and resistance to chloride-ion stress-corrosion cracking. It is used as wire rope for mooring cables, propeller blades for motor patrol gunboats, submarine auxiliary propulsion motors, submarine quickdisconnect fittings, exhaust ducts for Navy utility boats, sheathing for undersea communication cables, submarine transducer controls, and steam-line bellows. Potential applications are springs, seals, bellows for submerged controls, electrical cable connectors, fasteners, flexure devices, and oceanographic instrument components.   

 Chemical Composition, %
Nickel……………………………58.0 min.
Chromium……………………20.0-23.0
Iron…………………………….5.0 max.
Molybdenum………………………8.0-10.0
Niobium (plus Tantalum)….3.15-4.15
Carbon……………………..……….0.10 max.
Manganese……………………….0.50 max.
Silicon………………………………0.50 max.
Phosphorus……………………..0.015 max.
Sulfur……………………..……..0.015 max
Aluminum……………………..0.40 max.
Titanium………………………0.40 max.
Cobalta ………….………….1.0 max.

SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
             .AVAILABLE IN STOCK. 

 

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Features

• Fittings : ASME SB751

• Forgings : ASME SB-564, AMS 5665

• Pipe : ASME SB-167, ASME SB-829, ASME SB-517, ASME SB-775

• Round Bar : ASME SB-166, AMS 5665

• Sheet/Plate : ASME SB-168, AMS 5540

• Tube : ASME SB-163, ASME SB-516, ASME SB751, AMS 5580

INCONEL® (nickel-chromium-iron) alloy 600 (UNS N06600/W.Nr. 2.4816) is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability. The limiting chemical composition of INCONEL alloy 600 is shown in Table 1. The high nickel content gives the alloy resistance to corrosion by many organic and inorganic compounds and also makes it virtually immune to chloride-ion stress-corrosion cracking. Chromium confers resistance to sulfur compounds and also provides resistance to oxidizing conditions at high temperatures or in corrosive solutions. The alloy is not precipitation hardenable; it is hardened and strengthened only by cold work. The versatility of INCONEL alloy 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000°F (1095°C).

Chemical Composition, %
Nickel (plus Cobalt)....................................................72.0 min. Chromium..................................................................14.0-17.0
Iron ..........................................................................6.00-10.00
Carbon ......................................................................0.15 max.
Manganese ................................................................1.00 max Sulfur.......................................................................0.015 max.
Silicon .......................................................................0.50 max. Copper......................................................................0.50 max. 

SIZE AVAILABILITY
ROUND BAR:FROM 6MM DIA TO 200MM DIA.
PLATE:FROM 1MM TO 100MM THICKNESS.
SHEET:FROM 0.1MM TO 3MM THICKNESS.
           .AVAILABLE IN STOCK.  

Additional Information:

• Minimum Order Quantity: 10 KGS

t is becoming increasingly difficult to find rare or specialty metals and alloys. The majority of distributors have begun to focus on only a few of the most popular materials used in general metalworking. Even those companies that cater to larger companies have abandoned may of the hard-to-find alloys they once carried, and they have done away with many of their design options.

Locating an alloy like Invar 42 in the shape and size you need it in will require you to work with a large distributor that does business with all types of companies in a wide range of industries. All Metals & Forge remains one of the few metals companies that can supply aerospace and oil giants with what they need, while maintaining the ability to help smaller companies and metal shops find affordable products.

SIZE 6MM TO 200MM DIA ROUND BAR.

SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .

SIZE 0.5MM TO 6MM DIA WIRE.

       .AVAILABLE IN STOCK.

Additional Information:

• Minimum Order Quantity: 10 Kilogram