NITRONIC RODS

Electralloys Nitronic 40 Stainless Steel is a nitrogen strengthened austenitic stainless steel with great versatility, combining high yield strength with good corrosion resistance. Room temperature yield strength is about twice that of Types 304, 321 and 347. Nitronic 40 provides remarkably good elevated temperature properties and also retains its high strength and toughness at cryogenic temperatures. It has good high temperature oxidation resistance in air and resists stress corrosion cracking in severe marine environments at ambient temperature. Its austenite is so stable that it remains essentially non-magnetic at cryogenic temperatures or after up to 60% cold work. Chemical composition % Carbon (max.).................................. 0.04 Manganese..................................... 8.0/10.0 Phosphorus (max.).......................... 0.04 Sulfur (max.)................................... 0.010 Silicon (max.)................................... 1.00 Chromium....................................... 19/21.5 Nickel.............................................. 5.5/7.5 Nitrogen......................................0.20/0.40 Size 6mm To 200mm Dia Round Bar. Size 1mm To 100mm Thickness Plate. Size 6mm To 350mm Pipe . Size 0.5mm To 6mm Dia Wire. Available In Stock.

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Nitronic 50® stainless steel is an austenitic stainless steel with a blend of strength and corrosion resistance that is higher than stainless steel grades 316, 316/316L, 317, and 317/317L .

The high strength, corrosion resistance, and low magnetic permeability of this alloy allows it to be used as a material for medical implants.

The following sections will discuss in detail about stainless steel grade NITRONIC® 50 (XM-19).

Chemical Composition

The chemical composition of stainless steel grade NITRONIC® 50 (XM-19) is outlined in the following table.

Size 6mm To 200mm Dia Round Bar.
Size 1mm To 100mm Thickness Plate.
Size 6mm To 350mm Pipe .
Size 0.5mm To 6mm Dia Wire.
Available In Stock.

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Nitronic 60 Stainless Steel is an austenitic alloy, considered to have the best galling resistance of the entire range of Stainless Steels.

Characteristics of Nitronic 60 include:

• High pitting resistance
• Outstanding corrosion resistance
• Good high temperature properties for temperatures around 982 degrees Centigrade
• Oxidation resistance
• Crevice corrosion and chloride pitting resistance is greater than Stainless Steel 316.

 

Nitronic 60 can be formed using common forming techniques, and pre-heating is not required to weld Nitronic 60. Common welding methods such as gas metal arc, gas tungsten arc and submerged arc can be used to weld Nitronic 60. Hardening Nitronic 60 Stainless Steel calls for the alloy to be cold worked.

Primary Elements:

• Between 16 and 18 percent Chromium
• 8 to 9 percent Nickel
• 7 to 9 percent Manganese
• 3.5 to 4.5 percent Silicon
• Balance being Iron
• Trace amounts of Carbon, Sulfur, Phosphorus and Nitrogen

 

Industries Served:

• Oil and gas production
• Hydroelectric power
• Petrochemical
• Food processing
• Automotive
• Marine
• Pharmaceutical
• Construction and chemical sector

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE.

.AVAILABLE IN STOCK.

chemical Chemistry %

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.

.AVAILABLE IN STOCK.

Additional Information:

• Minimum Order Quantity: 10 Kilogram

Introduction

XM-19 stainless steel is an austenitic stainless steel with a blend of strength and corrosion resistance that is higher than stainless steel grades 316, 316/316L, 317, and 317/317L .

The high strength, corrosion resistance, and low magnetic permeability of this alloy allows it to be used as a material for medical implants.

The following sections will discuss in detail about stainless steel grade NITRONIC®50 (XM-19).

Chemical Composition of Xm-19

The chemical composition of stainless steel grade NITRONIC® 50 (XM-19) is outlined in the following table.

XM-19 STOCK

SIZE 6MM TO 200MM DIA ROUND BAR.
SIZE 1MM TO 100MM THICKNESS PLATE.
SIZE 6MM TO 350MM OD PIPE .
SIZE 0.5MM TO 6MM DIA WIRE.

.AVAILABLE IN STOCK.

Additional Information:

• Minimum Order Quantity: 10 Kilogram