Inconel Products

Inconel HX®, also known as Hastelloy X® is a nickel- chromium- iron- molybdenum alloy with great resistance to oxidation. Inconel HX® is used for components such as combustion chambers, tail pipes in aircraft and land-based gas turbine engines, fans and rollers in industrial furnaces. Inconel HX® is available as bar, rod, billet, extruded section, plate, sheet, strip, wire, pipe and tube. The alloy’s oxidation resistance is outstanding up to 2200º F. For hot forming, the alloy should be heated to a starting temperature of 2150°F (1175°C). Inconel HX® can be welded by metal arc, gas-tungsten- arc, gas-metal-arc and submerged arc processes. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:
Sheet/Plate ASME SB-435, AMS 5536

Round Bar/Wire ASME SB-572, AMS 5754, AMS 5798

Pipe ASME SB-622, AMSE SB 829, ASME SB-619, ASME SB-775

Tube ASME SB-626, ASME SB-751, ASME SB-62, AMS 5587

Fittings ASME SB-366

Forgings

AMS 5754

Chemical Composition, %

In what applications is Hastelloy X used?

• Gas turbines
• Petrochemical industry
• Industrial furnaces
• Heat treating equipment
• Nuclear engineering
• Jet engine combustion chambers
• Aircraft cabin heaters
• Turbine exhaust components

Inconel X-750 is a nickel-chromium alloy used for its corrosion and oxidation resistance and high strength at temperatures to 1300 F. Inconel X-750 is available in all standard mill forms therefore, it is used for a wide variety of applications. In gas turbines, it is used for rotor blades, wheels, bolts; Inconel X-750 is also used for rocket-engine thrust chambers. Airframe applications include thrust reverser and hot-air ducting systems. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges. Specification Sheet/Plate AMS 5542, AMS 5598 Round Bar/Wire ASME SB-637, AMS 5669, AMS 5698, AMS 5699 Pipe Tube AMS 5582, AMS 5583 Fittings Forgings ASME SB-637, AMS 5667, AMS 5668, AMS 5670, AMS 5671, AMS 5747 C MN P S Si Cr Ni Mo Cu Co Cb+Ta Ti Al Fe Nb .08 max 1.00 max .01 max .50 max 14.0 - 17.0 70.0 min 0.50 max 1.00 max 2.25 - 2.75 0.40 - 1.0 5.0 - 9.0 0.70 - 1.20

Additional Information:

• Item Code: N07750
• Minimum Order Quantity: 10 Kilogram

INCONEL® alloy 718 (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel chromium material used at -423° to 1300°F. Typical composition limits are shown in Table 1. The age-hardenable alloy can be readily fabricated, even into complex parts. Its welding characteristics, especially its resistance to postweld cracking, are outstanding. The ease and economy with which INCONEL alloy 718 can be fabricated, combined with good tensile, fatigue, creep, and rupture strength, have resulted in its use in a wide range of applications. Examples of these are components for liquid fueled rockets, rings, casings and various formed sheet metal parts for aircraft and land-based gas turbine engines, and cryogenic tankage. It is also used for fasteners and instrumentation parts.

Chemical Compositiona , %
Nickel (plus Cobalt) .......................................................50.00-55.00 Chromium......................................................................17.00-21.00 Iron .....................................................................................Balance*
Niobium (plus Tantalum)....................................................4.75-5.50
Molybdenum .....................................................................2.80-3.30 Titanium.............................................................................0.65-1.15
Aluminum ..........................................................................0.20-0.80
Cobalt ...............................................................................1.00 max. Carbon..............................................................................0.08 max.
Manganese .......................................................................0.35 max.
Silicon ...............................................................................0.35 max. Phosphorus.....................................................................0.015 max. Sulfur...............................................................................0.015 max.
Boron ..............................................................................0.006 max. Copper..............................................................................0.30 max

Additional Information:

• Minimum Order Quantity: 100 Kilogram

Inconel 617® consists of nickel-chromium-cobalt and molybdenum. These elements make Inconel 617® highly resistant to oxidation and carbonization. Inconel 617®can be easily fabricated; it can be hot formed up to 2200º F, and cold formed at 1900º F. Inconel 617® has excellent weld-ability. Inconel 617® is used for ducting, transition liners in both aircraft and land based gas turbines and combustion cans. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
Specification:
Sheet/Plate ASME SB-168
AMS 5888, AMS 5889
Round Bar/Wire ASME SB-166
AMS 5887
Pipe
Tube
Fittings
Forgings ASME SB-564 
AMS 5887
Chemical composition %
Nickel...........................................................................44.5 min. Chromium....................................................................20.0-24.0 Cobalt..........................................................................10.0-15.0
Molybdenum .................................................................8.0-10.0
Aluminum ........................................................................0.8-1.5
Carbon ........................................................................0.05-0.15 Iron................................................................................3.0 max.
Manganese ...................................................................1.0 max.
Silicon ...........................................................................1.0 max.
Sulfur ........................................................................0.015 max.
Titanium ........................................................................0.6 max. Copper..........................................................................0.5 max.
Boron ........................................................................0.006 max. 
 

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Common Trade Names: Inconel 600®, Nickelvac® 600, Ferrochronin® 600
 
Inconel 600® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 600® also has high strength and can be easily formed. Inconel 600® can be hardened and strengthened only by cold work. Inconel 600® can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. Inconel® 600 sheet is available in thicknesses ranging from .016 to .156". Inconel® 600 strip in coil from is available in lighter gauges up 24" wide. Inconel® 600 plate is available up 3" thickness. Inconel® 600 bar is available in wrought bar up to 9" diameter and larger sizes and shapes may be forged to order. Inconel® 600 seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 600 tubing (welded & seamless) is available up 3". Inconel® 600 redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:
International SpecificationsBS 3072-3076 (NA14)
DIN 17742, DIN 17750, DIN 17754
WERKSTOFF Nr 2.4816
TÜV 305
AFNOR-NC 15 FeSheet/PlateASTM B168, AMS 5540Round Bar/WireASTM B166, AMS 5665Pipe & TubeASTM B167, ASTM B829, ASTM B517, ASTM B775, ASTM B163, ASTM B516, ASTM B751, AMS 5580FittingsASTM B366ForgingsASTM B564, AMS 5665Weld WireAWS A5.14 ERNiCr-3, AWS A5.11 ENiCrFe-3CMNPSSiCrNiMoCuCoCb TaTiAlFe.15 max1.0 max.015 max.5 max14.0 -17.072.0 min.5 max6.0 - 10.0
 

Alloy A286® has high strength and good corrosion resistance; therefore, it is used for applications at temperature up to 1300° F. Alloy A286® can be hardened and strengthened by heat treatment. Alloy A286® has been used in jet engines, superchargers, turbine wheels, blades, casings, afterburner parts, and fasteners.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Inconel 617® consists of nickel-chromium-cobalt and molybdenum. These elements make Inconel 617® highly resistant to oxidation and carbonization. Inconel 617®can be easily fabricated; it can be hot formed up to 2200º F, and cold formed at 1900º F. Inconel 617® has excellent weld-ability. Inconel 617® is used for ducting, transition liners in both aircraft and land based gas turbines and combustion cans. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:
Sheet/Plate ASME SB-168
AMS 5888, AMS 5889

Round Bar/Wire ASME SB-166
AMS 5887

Pipe

Tube

Fittings

Forgings ASME SB-564
AMS 5887

C MN P S Si Cr Ni Mo Cu Co Cb+Ta Ti Al Fe B

.05 - .15 1.0 max .015 max 1.0 max 20.0 -24.0 44.5 min 8.0 - 10.0 .5 max 10.0 - 15.0 0.6 max .8 - 1.5 3.0 max .006 max

 

Additional Information:

• Item Code: N06617
• Minimum Order Quantity: 10 Kilogram(s)

Inconel HX®, also known as Hastelloy X® is a nickel- chromium- iron- molybdenum alloy with great resistance to oxidation. Inconel HX® is used for components such as combustion chambers, tail pipes in aircraft and land-based gas turbine engines, fans and rollers in industrial furnaces. Inconel HX® is available as bar, rod, billet, extruded section, plate, sheet, strip, wire, pipe and tube. The alloy’s oxidation resistance is outstanding up to 2200º F. For hot forming, the alloy should be heated to a starting temperature of 2150°F (1175°C). Inconel HX® can be welded by metal arc, gas-tungsten- arc, gas-metal-arc and submerged arc processes. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:
Sheet/Plate ASME SB-435, AMS 5536

Round Bar/Wire ASME SB-572, AMS 5754, AMS 5798

Pipe ASME SB-622, AMSE SB 829, ASME SB-619, ASME SB-775

Tube ASME SB-626, ASME SB-751, ASME SB-62, AMS 5587

Fittings ASME SB-366

Forgings

AMS 5754

 Chemical Composition, %

Applications OF Hastelloy X 

• Gas turbines
• Petrochemical industry
• Industrial furnaces
• Heat treating equipment
• Nuclear engineering
• Jet engine combustion chambers
• Aircraft cabin heaters
• Turbine exhaust components

 

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Inconel X-750® is a nickel-chromium alloy used for its corrosion and oxidation resistance and high strength at temperatures to 1300º F. Inconel X-750® is available in all standard mill forms therefore, it is used for a wide variety of applications. In gas turbines, it is used for rotor blades, wheels, bolts; Inconel X-750® is also used for rocket-engine thrust chambers. Airframe applications include thrust reverser and hot-air ducting systems. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Alloy 718 is a precipitation hard-enable nickel-based alloy designed to display exceptionally high yield, tensile and creep-rupture properties at temperatures up to 1300°F (704°C). The age-hardening response of Alloy 718 permits annealing and welding without spontaneous hardening during heating and cooling. Alloy 718 has excellent weld-ability, when compared to the nickel-base super alloys hardened by aluminum and titanium.

Inconel 601® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 601® also has high strength and good workability. Inconel 601® can be hardened and strengthened only by cold work. Inconel 601®can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. Inconel® 601 sheet is available in thicknesses ranging from .010 to .120". Inconel® 601 strip in coil from is available in lighter gauges up 24" wide. Inconel® 601 plate is available up 2" thickness. Inconel® 601 bar is available in wrought bar up to 3" diameter and larger sizes and shapes may be forged to order. Inconel® 601 seamless pipe is available up to 4" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 601 tubing is not commonly available, but can be produced to order. Redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube and bar.

 

Specification:

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Common Trade Names: Inconel 625®, Chornin® 625, Altemp® 625, Nickelvac® 625, Haynes® 625 Nicrofer® 6020

Inconel® 625 is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. It has high strength and toughness in the temperature range cryogenic to 2000°F (1093°C) which is derived largely from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions.

Typical applications for Inconel® 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware and special seawater applications.

Inconel® 625 sheet is available in thicknesses ranging from .010 to .156". Inconel® 625 strip in coil from is available in lighter gauges up 24" wide. Inconel® 625 plate is available up 4" thick.

Inconel® 625 bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order.

Inconel® 625 seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 625 tubing (welded & seamless) is available up 3" OD to both aerospace (AMS 5581) and commercial (ASTM B444) specifications. Redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.

Butt-weld and forged fittings are available or can be manufactured with short lead times.

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges..

 

 

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Common Trade Names: Inconel 625®, Chornin® 625, Altemp® 625, Nickelvac® 625, Haynes® 625 Nicrofer® 6020

Inconel® 625 is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. It has high strength and toughness in the temperature range cryogenic to 2000°F (1093°C) which is derived largely from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions.

Typical applications for Inconel® 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware and special seawater applications.

Inconel® 625 sheet is available in thicknesses ranging from .010 to .156". Inconel® 625 strip in coil from is available in lighter gauges up 24" wide. Inconel® 625 plate is available up 4" thick.

Inconel® 625 bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order.

Inconel® 625 seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 625 tubing (welded & seamless) is available up 3" OD to both aerospace (AMS 5581) and commercial (ASTM B444) specifications. Redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.

Butt-weld and forged fittings are available or can be manufactured with short lead times.

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges..

 

 

Common Trade Names: Inconel 600®, Nickelvac® 600, Ferrochronin® 600

 

Inconel 600® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 600® also has high strength and can be easily formed. Inconel 600® can be hardened and strengthened only by cold work. Inconel 600® can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. Inconel® 600 sheet is available in thicknesses ranging from .016 to .156". Inconel® 600 strip in coil from is available in lighter gauges up 24" wide. Inconel® 600 plate is available up 3" thickness. Inconel® 600 bar is available in wrought bar up to 9" diameter and larger sizes and shapes may be forged to order. Inconel® 600 seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 600 tubing (welded & seamless) is available up 3". Inconel® 600 redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

 

Additional Information:

• Item Code: N06600
• Minimum Order Quantity: 10 kg

Alloy A286® has high strength and good corrosion resistance; therefore, it is used for applications at temperature up to 1300° F. Alloy A286® can be hardened and strengthened by heat treatment. Alloy A286® has been used in jet engines, superchargers, turbine wheels, blades, casings, afterburner parts, and fasteners.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:
Sheet/Plate AMS 5525, AMS 5858

Round Bar/Wire AMS 5731, AMS 5732, AMS 5737

 Chemical Composition, %
Nickel.........................................................................24.0-27.0
Iron .............................................................................Balance* Chromium..................................................................13.5-16.0 Titanium.....................................................................1.90-2.35 Molybdenum..................................................................1.0-1.5 Vanadium...................................................................0.10-0.50
Carbon ......................................................................0.08 max.
Manganese .................................................................2.0 max.
Silicon .........................................................................1.0 max. Aluminum..................................................................0.35 max. Sulfur.......................................................................0.030 max. Boron.......................................................................0.001-0.01

 

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Inconel 601® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 601® also has high strength and good workability. Inconel 601® can be hardened and strengthened only by cold work. Inconel 601®can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. Inconel® 601 sheet is available in thicknesses ranging from .010 to .120". Inconel® 601 strip in coil from is available in lighter gauges up 24" wide. Inconel® 601 plate is available up 2" thickness. Inconel® 601 bar is available in wrought bar up to 3" diameter and larger sizes and shapes may be forged to order. Inconel® 601 seamless pipe is available up to 4" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 601 tubing is not commonly available, but can be produced to order. Redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube and bar.

 

Specification:

Additional Information:

• Item Code: N06601
• Minimum Order Quantity: 10 Kilogram

Inconel 601® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 601® also has high strength and good workability. Inconel 601® can be hardened and strengthened only by cold work. Inconel 601®can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. Inconel® 601 sheet is available in thicknesses ranging from .010 to .120". Inconel® 601 strip in coil from is available in lighter gauges up 24" wide. Inconel® 601 plate is available up 2" thickness. Inconel® 601 bar is available in wrought bar up to 3" diameter and larger sizes and shapes may be forged to order. Inconel® 601 seamless pipe is available up to 4" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 601 tubing is not commonly available, but can be produced to order. Redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube and bar.

 

Specification:

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Inconel X-750® is a nickel-chromium alloy used for its corrosion and oxidation resistance and high strength at temperatures to 1300º F. Inconel X-750® is available in all standard mill forms therefore, it is used for a wide variety of applications. In gas turbines, it is used for rotor blades, wheels, bolts; Inconel X-750® is also used for rocket-engine thrust chambers. Airframe applications include thrust reverser and hot-air ducting systems. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Alloy A286® has high strength and good corrosion resistance; therefore, it is used for applications at temperature up to 1300° F. Alloy A286® can be hardened and strengthened by heat treatment. Alloy A286® has been used in jet engines, superchargers, turbine wheels, blades, casings, afterburner parts, and fasteners.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

Additional Information:

• Item Code: S66286
• Minimum Order Quantity: 10 kg

Alloy A286® has high strength and good corrosion resistance; therefore, it is used for applications at temperature up to 1300° F. Alloy A286® can be hardened and strengthened by heat treatment. Alloy A286® has been used in jet engines, superchargers, turbine wheels, blades, casings, afterburner parts, and fasteners.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Alloy A286® has high strength and good corrosion resistance; therefore, it is used for applications at temperature up to 1300° F. Alloy A286® can be hardened and strengthened by heat treatment. Alloy A286® has been used in jet engines, superchargers, turbine wheels, blades, casings, afterburner parts, and fasteners.

 

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

Inconel HX®, also known as Hastelloy X® is a nickel- chromium- iron- molybdenum alloy with great resistance to oxidation. Inconel HX® is used for components such as combustion chambers, tail pipes in aircraft and land-based gas turbine engines, fans and rollers in industrial furnaces. Inconel HX® is available as bar, rod, billet, extruded section, plate, sheet, strip, wire, pipe and tube. The alloy’s oxidation resistance is outstanding up to 2200º F. For hot forming, the alloy should be heated to a starting temperature of 2150°F (1175°C). Inconel HX® can be welded by metal arc, gas-tungsten- arc, gas-metal-arc and submerged arc processes. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

Inconel X-750® is a nickel-chromium alloy used for its corrosion and oxidation resistance and high strength at temperatures to 1300º F. Inconel X-750® is available in all standard mill forms therefore, it is used for a wide variety of applications. In gas turbines, it is used for rotor blades, wheels, bolts; Inconel X-750® is also used for rocket-engine thrust chambers. Airframe applications include thrust reverser and hot-air ducting systems. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Alloy 718 is a precipitation hard-enable nickel-based alloy designed to display exceptionally high yield, tensile and creep-rupture properties at temperatures up to 1300°F (704°C). The age-hardening response of Alloy 718 permits annealing and welding without spontaneous hardening during heating and cooling. Alloy 718 has excellent weld-ability, when compared to the nickel-base super alloys hardened by aluminum and titanium.

Inconel 601® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 601® also has high strength and good workability. Inconel 601® can be hardened and strengthened only by cold work. Inconel 601®can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. Inconel® 601 sheet is available in thicknesses ranging from .010 to .120". Inconel® 601 strip in coil from is available in lighter gauges up 24" wide. Inconel® 601 plate is available up 2" thickness. Inconel® 601 bar is available in wrought bar up to 3" diameter and larger sizes and shapes may be forged to order. Inconel® 601 seamless pipe is available up to 4" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 601 tubing is not commonly available, but can be produced to order. Redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube and bar.

 

Specification:

Common Trade Names: Inconel 600®, Nickelvac® 600, Ferrochronin® 600

 

Inconel 600® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 600® also has high strength and can be easily formed. Inconel 600® can be hardened and strengthened only by cold work. Inconel 600® can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. Inconel® 600 sheet is available in thicknesses ranging from .016 to .156". Inconel® 600 strip in coil from is available in lighter gauges up 24" wide. Inconel® 600 plate is available up 3" thickness. Inconel® 600 bar is available in wrought bar up to 9" diameter and larger sizes and shapes may be forged to order. Inconel® 600 seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 600 tubing (welded & seamless) is available up 3". Inconel® 600 redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

 

Alloy 718 is a precipitation hard-enable nickel-based alloy designed to display exceptionally high yield, tensile and creep-rupture properties at temperatures up to 1300°F (704°C). The age-hardening response of Alloy 718 permits annealing and welding without spontaneous hardening during heating and cooling. Alloy 718 has excellent weld-ability, when compared to the nickel-base super alloys hardened by aluminum and titanium.

Inconel 617® consists of nickel-chromium-cobalt and molybdenum. These elements make Inconel 617® highly resistant to oxidation and carbonization. Inconel 617®can be easily fabricated; it can be hot formed up to 2200º F, and cold formed at 1900º F. Inconel 617® has excellent weld-ability. Inconel 617® is used for ducting, transition liners in both aircraft and land based gas turbines and combustion cans. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

 

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Common Trade Names: Inconel 600®, Nickelvac® 600, Ferrochronin® 600

 

Inconel 600® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 600® also has high strength and can be easily formed. Inconel 600® can be hardened and strengthened only by cold work. Inconel 600® can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. Inconel® 600 sheet is available in thicknesses ranging from .016 to .156". Inconel® 600 strip in coil from is available in lighter gauges up 24" wide. Inconel® 600 plate is available up 3" thickness. Inconel® 600 bar is available in wrought bar up to 9" diameter and larger sizes and shapes may be forged to order. Inconel® 600 seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 600 tubing (welded & seamless) is available up 3". Inconel® 600 redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

 

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Common Trade Names: Inconel 625®, Chornin® 625, Altemp® 625, Nickelvac® 625, Haynes® 625 Nicrofer® 6020

Inconel® 625 is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. It has high strength and toughness in the temperature range cryogenic to 2000°F (1093°C) which is derived largely from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions.

Typical applications for Inconel® 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware and special seawater applications.

Inconel® 625 sheet is available in thicknesses ranging from .010 to .156". Inconel® 625 strip in coil from is available in lighter gauges up 24" wide. Inconel® 625 plate is available up 4" thick.

Inconel® 625 bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order.

Inconel® 625 seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 625 tubing (welded & seamless) is available up 3" OD to both aerospace (AMS 5581) and commercial (ASTM B444) specifications. Redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.

Butt-weld and forged fittings are available or can be manufactured with short lead times.

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges..

 

 

Inconel HX®, also known as Hastelloy X® is a nickel- chromium- iron- molybdenum alloy with great resistance to oxidation. Inconel HX® is used for components such as combustion chambers, tail pipes in aircraft and land-based gas turbine engines, fans and rollers in industrial furnaces. Inconel HX® is available as bar, rod, billet, extruded section, plate, sheet, strip, wire, pipe and tube. The alloy’s oxidation resistance is outstanding up to 2200º F. For hot forming, the alloy should be heated to a starting temperature of 2150°F (1175°C). Inconel HX® can be welded by metal arc, gas-tungsten- arc, gas-metal-arc and submerged arc processes. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:Sheet/PlateASME SB-435, AMS 5536Round Bar/WireASME SB-572, AMS 5754, AMS 5798PipeASME SB-622, AMSE SB 829, ASME SB-619, ASME SB-775TubeASME SB-626, ASME SB-751, ASME SB-62, AMS 5587FittingsASME SB-366Forgings
AMS 5754
CMNPSSiCrNiMoCuCoCb TaTiAlFeW.05 - .151.0 max0.04 max0.03 max1.0 max20.5 - 23.0bal8.0 - 10.00.5 - 2.517.0 -20.00.2 -1.0

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Inconel 601® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 601® also has high strength and good workability. Inconel 601® can be hardened and strengthened only by cold work. Inconel 601®can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. Inconel® 601 sheet is available in thicknesses ranging from .010 to .120". Inconel® 601 strip in coil from is available in lighter gauges up 24" wide. Inconel® 601 plate is available up 2" thickness. Inconel® 601 bar is available in wrought bar up to 3" diameter and larger sizes and shapes may be forged to order. Inconel® 601 seamless pipe is available up to 4" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 601 tubing is not commonly available, but can be produced to order. Redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube and bar.

 

Specification:

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Common Trade Names: Inconel 600®, Nickelvac® 600, Ferrochronin® 600

 

Inconel 600® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 600® also has high strength and can be easily formed. Inconel 600® can be hardened and strengthened only by cold work. Inconel 600® can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. Inconel® 600 sheet is available in thicknesses ranging from .016 to .156". Inconel® 600 strip in coil from is available in lighter gauges up 24" wide. Inconel® 600 plate is available up 3" thickness. Inconel® 600 bar is available in wrought bar up to 9" diameter and larger sizes and shapes may be forged to order. Inconel® 600 seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 600 tubing (welded & seamless) is available up 3". Inconel® 600 redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

 

Common Trade Names: Inconel 625®, Chornin® 625, Altemp® 625, Nickelvac® 625, Haynes® 625 Nicrofer® 6020

Inconel® 625 is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. It has high strength and toughness in the temperature range cryogenic to 2000°F (1093°C) which is derived largely from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions.

Typical applications for Inconel® 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware and special seawater applications.

Inconel® 625 sheet is available in thicknesses ranging from .010 to .156". Inconel® 625 strip in coil from is available in lighter gauges up 24" wide. Inconel® 625 plate is available up 4" thick.

Inconel® 625 bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order.

Inconel® 625 seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 625 tubing (welded & seamless) is available up 3" OD to both aerospace (AMS 5581) and commercial (ASTM B444) specifications. Redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.

Butt-weld and forged fittings are available or can be manufactured with short lead times.

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges..

 

 

Additional Information:

• Minimum Order Quantity: 10 kg

Alloy 718 is a precipitation hard-enable nickel-based alloy designed to display exceptionally high yield, tensile and creep-rupture properties at temperatures up to 1300°F (704°C). The age-hardening response of Alloy 718 permits annealing and welding without spontaneous hardening during heating and cooling. Alloy 718 has excellent weld-ability, when compared to the nickel-base super alloys hardened by aluminum and titanium.

Chemical Compositiona , %
Nickel (plus Cobalt) .......................................................50.00-55.00 Chromium......................................................................17.00-21.00
Iron .....................................................................................Balance*
Niobium (plus Tantalum)....................................................4.75-5.50
Molybdenum .....................................................................2.80-3.30 Titanium.............................................................................0.65-1.15
Aluminum ..........................................................................0.20-0.80
Cobalt ...............................................................................1.00 max. Carbon..............................................................................0.08 max.
Manganese .......................................................................0.35 max.
Silicon ...............................................................................0.35 max. Phosphorus.....................................................................0.015 max. Sulfur...............................................................................0.015 max.
Boron ..............................................................................0.006 max. Copper..............................................................................0.30 max.

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)

Inconel X-750® is a nickel-chromium alloy used for its corrosion and oxidation resistance and high strength at temperatures to 1300º F. Inconel X-750® is available in all standard mill forms therefore, it is used for a wide variety of applications. In gas turbines, it is used for rotor blades, wheels, bolts; Inconel X-750® is also used for rocket-engine thrust chambers. Airframe applications include thrust reverser and hot-air ducting systems. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specification:

Sheet/PlateAMS 5542, AMS 5598

Round Bar/WireASME SB-637, AMS 5669, AMS 5698, AMS 5699

Pipe

TubeAMS 5582, AMS 5583

Fittings

ForgingsASME SB-637, AMS 5667, AMS 5668, AMS 5670, AMS 5671, AMS 5747

CMNPSSiCrNiMoCuCoCb+TaTiAlFeNb

.08 max1.00 max.01 max.50 max14.0 - 17.070.0 min0.50 max1.00 max2.25 - 2.750.40 - 1.05.0 - 9.00.70 - 1.20

Additional Information:

• Minimum Order Quantity: 10 Kilogram(s)